الكفاءة التجريبية لسخان الهواء الشمسي بمرور واحد

Abene, A. et al., 2004. Study of a solar air flat plate collector: use of obstacles and application for the drying of grape. Journal of food engineering, 65(1), pp.15–22.

Andrassy, M., 2012. Numerically assisted analysis of flat and corrugated plate solar collectors thermal performances. Solar Energy, 86, pp.2416–2431.

ASHRAE, 1977. 93-77,“Methods of testing to determine the thermal performance of solar collectors,”

Bansal, N.K., 1999. Solar air heater applications in India. Renewable Energy, 16(1–4), pp.618–623. Available at: http://www.sciencedirect.com/science/article/pii/S0960148198002377.

Belusko, M., Saman, W. & Bruno, F., 2006. Jet Impingement in an Unglazed Solar Air Collector. In International Heat Transfer Conference 13. Begel House Inc.

C., H.J., 2013. Heat Transfer and Friction in Channels With Two Opposite Rib-Roughened Wails. journal of heat transfer, Asme transaction, 106(November 1984).

Chauhan, R. et al., 2016. Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method. Renewable Energy, 99, pp.118–126. Available at: http://dx.doi.org/10.1016/j.renene.2016.06.046.

Chauhan, R. & Thakur, N.S., 2013. Heat transfer and friction factor correlations for impinging jet solar air heater. Experimental Thermal and Fluid Science, 44, pp.760–767. Available at: http://dx.doi.org/10.1016/j.expthermflusci.2012.09.019.

Chauhan, R. & Thakur, N.S., 2014. Investigation of the thermohydraulic performance of impinging jet solar air heater. Energy, 68, pp.255–261. Available at: http://dx.doi.org/10.1016/j.energy.2014.02.059.

Choudhury, C. & Garg, H.P., 1991. Evaluation of a jet plate solar air heater. Solar Energy, 46(4), pp.199–209.

CHOUDHURY, C. & GARG, H.P., 1991. Design analysis of corrugated and flat plate solar air heaters. Renewable Energy, 1(5), pp.595–607.

Elbreki, A.M. et al., 2016. The role of climatic-design-operational parameters on combined PV/T collector performance: A critical review. Renewable and Sustainable Energy Reviews, 57, pp.602–647. Available at: http://www.sciencedirect.com/science/article/pii/S1364032115013441.

Florschuetz, L.W., Metzger, D.E. & Truman, C.R., 1981. Jet array impingement with crossflow-correlation of streamwise resolved flow and heat transfer distributions.

Gao, L., Ekkad, S. V & Bunker, R.S., 2005. Impingement Heat Transfer Part I: Linearly Stretched Arrays of Holes. Journal of thermophysics and heat transfer, 19(1), pp.57–65.

Gao, W., 1996. Analysis and performance of a solar air heater with cross corrugated absorber and back-plate. MS thesis, Yunnan Normal University, Kunming.

Gao, W. et al., 2007. Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters. Applied Energy, 84, pp.425–441.

Gao, W., Lin, W. & Lu, E., 2000. Numerical study on natural convection inside the channel between the ¯ at-plate cover and sine-wave absorber of a cross-corrugated solar air heater. Energy Conversion & Management, 41, pp.145–151.

Goldstein, L. & Sparrow, E.M., 1976. Experiments on the Transfer Characteristics of a Corrugated Fin and Tube Heat Exchanger Configuration. journal of heat transfer, the transactions of Asme, 98(February 1976), pp.26–34.

Hematian, A., Ajabshirchi, Y. & Bakhtiari, A.A., 2012. Experimental analysis of flat plate solar air collector efficiency. Indian Journal of Science and Technology, 5(8), pp.3183–3187.

KAYS, W.M. & CRAWFORD, M.E., 1980. Convective Heat and Mass Transfert, McGraw-Hill.

Kercher, D.M. & Tabakoff, W., 2016. Heat Transfer by a Spare Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air. journal of engineering for power, 92, pp.73–82.

Kurtbas, I. & Turgut, E., 2006. Experimental investigation of solar air heater with free and fixed fins: efficiency and exergy loss. Int. J. Sci. Technol, 1(1), pp.75–82.

Lin, W., Gao, W. & Liu, T., 2006. A parametric study on the thermal performance of cross-corrugated solar air collectors. Applied Thermal Engineering, 26, pp.1043–1053.

Metzger, D.E. et al., 1979. Heat Transfer Characteristics for Inline and Staggered Arrays of Circular Jets with Crossflow of Spent Air. Journal of Heat Transfer, 101(August 1979), pp.526–531.

Nayak, R.K. & Singh, S.N., 2016. Effect of geometrical aspects on the performance of jet plate solar air heater. Solar Energy, 137, pp.434–440. Available at: http://dx.doi.org/10.1016/j.solener.2016.08.024.

Pottler, K. et al., 1999. Optimized finned absorber geometries for solar air heating collectors. Solar Energy, 67(1), pp.35–52.

Prasad, K. & Mullick, S.C., 1983. Heat transfer characteristics of a solar air heater used for drying purposes. Applied Energy, 13(2), pp.83–93. Available at: http://www.sciencedirect.com/science/article/pii/0306261983900016.

Ramani, B.M., Gupta, A. & Kumar, R., 2010. Performance of a double pass solar air collector. Solar Energy, 84(11), pp.1929–1937.

Singh, G. & Sidhu, G.S., 2014. Enhancement of heat transfer of solar air heater roughened with circular transverse RIB. International Advanced Research Journal in Science, Engineering and Technology, 1(4), pp.196–200.

Singh, S. et al., 2012. Heat transfer and friction factor of discrete V-down rib roughened solar air heater ducts Heat transfer and friction factor of discrete V-down rib. , 13108(2011).

Singh, S.N., 2013. Flow and Heat Transfer Studies in a Double–Pass Counter Flow Solar Air Heater. International Journal of Heat and Technology, 31(2), pp.37–42.

Singh, S.N., 2006. Performance studies on continuous longitudinal fins solar air heater. In Proceedings of the 1st National Conference on Advances in Energy Research. pp. 205–210.

Verma, S.K. & Prasad, B.N., 2000. Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters. Renewable Energy, 20(1), pp.19–36. Available at: http://www.sciencedirect.com/science/article/pii/S0960148199000816.

Wazed, M.A., Nukman, Y. & Islam, M.T., 2010. Design and fabrication of a cost effective solar air heater for Bangladesh. APPLIED ENERGY. Available at: http://dx.doi.org/10.1016/j.apenergy.2010.02.014.

Yousef, B.A.A. & Adam, N.M., 2008. Performance analysis for flat plate collector with and without porous media. Journal of Energy in southern Africa, 19(4), pp.32–42.