تقدير عمر الأداة من القياسات أثناء عملية الخراطة الطولية باستخدام المربعات الصغرى الخطية

C.J.Rao, D.Sreeamulu, Arun Tom Mathew, (2014). Analysis of Tool Life during Turning Operation by Determining Optimal Process Parameters, 12th Global Congress on Manufacturing and Management, GCMM, ScienceDirect. doi: 10.1016/j.proeng.2014.12.247

Nexhat Qehaja, Azem Kycyku, (2017). Tool Life Modelling Based on Cutting Parameters and Work Material Hardness in Turning Process, Scientific Proceedings XIV International Congress “Machines Technologies. Materials.”, Year I, Volume IV, P.P. 278-281.

Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P., (2020). Use of Longitudinal Roughness Measurements as Tool End-of-Life Indicator in AISI 1045 Dry Longitudinal Turning. Materials Science Forum, 986, 93–101.

Feldshtein, Eugene E.; Wojciechowski, Szymon., (2017). Wear of carbide inserts during turning of C45 steel in dry cutting conditions and in presence of emulsion mist, E3S Web of Conferences 19, 03009

Stachurski, W.; Kruszynski, B.; Midera, S., (2012). Determination of Mathematical Formulae for the Cutting Force FC during the Turning of C45 Steel, Mechanics and Mechanical Engineering, Vol. 16, No. 2 (2012) 73–79

Stachurski, W., (2018). Cutting forces during longitudinal turning process of TI-6AL-4V ELI alloy. Theoretical and experimental values. Journal of Mechanical and Energy Engineering, Vol. 2(42), No. 3, pp. 201-206.

Muamar M. Ben Isa, H. A. Aswihli and A. Alkhwaji, (2021). Experimental Investigation of Cutting Parameters Effect on Surface Roughness During Wet and Dry Turning of Low Carbon Steel Material, Journal of Academic Research (Applied Sciences), VOL.17

Chou, Y. K.; & Song, H., (2004). Tool nose radius effects on finish hard turning. Journal of Materials Processing Technology, 148(2), 259–268.

Abhang, L. B.; et al. (2010). Chip-Tool Interface Temperature Prediction Model for Turning Process, International Journal of Engineering Science and Technology Vol. 2(4), 382-393

Kalpakjian, Serope; Schmid, Steven R. (2003). Manufacturing Processes for Engineering Materials, Pearson Education, Inc., Upper Saddle River, NJ 07458

Astakhov, V. P. (2004). The assessment of cutting tool wear. International Journal of Machine Tools and Manufacture, 44(6), 637–647.

Li, B. (2012). A review of tool wear estimation using theoretical analysis and numerical simulation technologies. International Journal of Refractory Metals and Hard Materials, 35, 143–151.

Mukherjee, I.; & Ray, P. K. (2006). A review of optimization techniques in metal cutting processes. Computers & Industrial Engineering, 50(1-2), 15–34. doi: 10.1016/j.cie.2005.10.001

PNRAO. Metal cutting and machine tools, Text book of Tata Mech Grawhil publications, 2013, Vol.2, 3rd Edition.

Material data sheet for steel grade from OVAKO; [accessed 2020 September 23]. Available from: http://www.ovako.com/en/Contact-Ovako/